Číslo výrobku
{{item.ItemCode}}
Upravit adresu
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
procento DPH
{{item.VATPercentage}}%
Značka
{{item.ItemBrandDescription}}
Kód dodavatele
{{item.SupplierCode}}
Kód kurýra položky
{{item.ItemSupplierCode}}
Velikost balení
{{item.PackSize}}
Suitable for food production
For non-perishable foods only
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Automatic
Ferrous particles disposal via
Pneumatically moving to and cleaning magnets in side channel
Ferrous particles disposal collection unit
No
Product inlet size
#200 mm
Product outlet size
#200 mm
Ferrous particles outlet size
#120 mm
Interface connection type/size
Square flanges with hole pattern acc. to drawing
Pneumatic connection
For 6 mm hose
Electrical connection
To solenoid valve
Electrical connection 2
To proximity sensors for magnet (bar) detection (3x24 V)
Materials in contact with product
AISI304 (SS 1.4301) / AISI316L (SS 1.4404)
Material gasket inspection hatch(es)
Silicone VMQ, 60° Shore, EC1935/FDA, transparent
Material gasket top plate
Silicone VMQ, 60° Shore, EC1935/FDA, transparent
Material seal rings between housing and magnetic bars
Silicone 714177 coated, 70° Shore, EC1935/FDA, red
Top inspection hatch
Bolted cover plate AISI316L (SS 1.4404)
Side inspection hatch
Bolted cover plate PETG Griphen (transparent)
Surface finishing (interior/exterior)
S1: Grit blasted, Ra 3 µm
Extra wear-resistant coating
No
Welds inside the product channel
WM: Continuously welded
Welds outside the product channel
WM: Continuously welded
Max. operating temperature
60 °C
Min./max. ambient temperature
-5 to 40 °C
ATEX marking
Ex II 1/3 D T130 °C
Suited for use in ATEX zone
20, 21 and 22 inside, 22 outside
Magnetic system
Magnetic bar in tube
Magnet quality
Neodymium N-52
Magnetic bars position / behaviour during production
Static, fixed position 1 row
Magnetic bar size
Ø52,4 mm (wall thickness 1,2 mm)
Number of magnetic bars
2
Flux density on magnet tube in contact with product (±10%)
12000 gauss
Solenoid valve electric supply
2x24 V DC
Pneumatic supply magnetic bars
4 - 6 bar
Control
Electrical/pneumatic
Incl. Sigmatek PLC control
No
Incl. single bar in/out sensoring
No
Incl. all bars magnet in/out sensoring
No