{{item.Description}}

Nuevo
Sale
Sale
{{item.Description}}
{{item.Description}}

características

Número de artículo
{{item.ItemCode}}
Código EAN
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
Porcentaje de IVA
{{item.VATPercentage}}%
UNSPSC
{{item.UNSPSC}}
Marca
{{item.ItemBrandDescription}}
Código del correo del artículo
{{item.ItemSupplierCode}}
Tamaño del paquete
{{item.PackSize}}
Suitable for food production
No
Max. particle size
10 mm
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Automatic
Ferrous particles disposal via
Pneumatically actuated valve box underneath product channel
Build-in length
1275 mm
Inlet shape
Square
Outlet shape
Square
Product inlet size
#400 mm
Product outlet size
#400 mm
Interface connection type/size
Rectangular flanges with hole pattern acc. to drawing
Pneumatic connection
For 6 mm hose
Electrical connection
To control unit
Max. capacity
60 m³/h
Version housing
Welded
Materials in contact with product
AISI304 (SS 1.4301) / AISI316L (SS 1.4404)
Material seal ring rotor disc
NBR RST, 70° Shore A
Material seal ring rotor shaft
NBR RST, 70° Shore A
Material flange gasket magnet housing / valve box
Silicone VMQ, 60° Shore, EC1935/FDA, transparent
Surface finishing (interior/exterior)
S1: Grit blasted, Ra 3 µm
Extra wear-resistant coating
No
Welds inside the product channel
WH: Continuously welded
Welds outside the product channel
WH: Welded shut
Max. operating temperature
60 °C
Max. operating temperature in ATEX environment
40 °C
Min./max. ambient temperature
-5 to 40 °C
ATEX marking
Ex II 3D
Suited for use in ATEX zone
22
Magnetic system
Magnetic bar in tube
Magnet quality
Neodymium N-42
Magnetic bars position / behaviour during production
Rotating, magnetic bars placed in a rotor
Magnetic bar size
Ø34 mm
Number of magnetic bars
12
Flux density on magnet tube in contact with product (±10%)
9400 gauss
Control unit power supply
3x400 V AC + N + PE; 50 Hz
Pneumatic supply magnetic bars
4 - 6 bar
Motor drive
SEW electro motor with gear box
Motor power
0,37 kW
Motor current
1,82 (Δ) / 1,05 (Y) A
Motor frequency
50 Hz
Motor voltage
230 (Δ) / 400 (Y) V AC
Motor rotational speed (out)
6 rpm
Motor dust/water protection class
IP65
Control
PLC Siemens LOGO! logic Module (included)
Including integrated valve box for Fe-particles disposal
Yes
Incl. all bars magnet in/out sensoring
No
Length
1565 mm
Width
610 mm
Height
1275 mm
Paso {{$index + 1}}: {{itemAttribute.Description}} ({{vm.selectedItemOptions[itemAttribute.AttributeID].AttributeValue.Description}})

{{itemAttribute.Description}}

{{ '{0} debe tener al menos {1} caracteres'.replace('{0}', itemAttribute.Description).replace('{1}', itemAttribute.MinLength) }} {{ '{0} puede tener como máximo {1} caracteres'.replace('{0}', itemAttribute.Description).replace('{1}', itemAttribute.MaxLength) }} {{ '{0} debe estar entre {1} y {2}'.replace('{0}', itemAttribute.Description).replace('{1}', itemAttribute.MinLength ? itemAttribute.MinLength : 0).replace('{2}', itemAttribute.MaxLength) }} {{ '{0} contiene demasiados decimales'.replace('{0}', itemAttribute.Description) }} Se requiere la opción
Es obligatorio hacer una elección
Se requiere la opción

Precio
[BTW text]

Todos los precios son sin IVA, salvo que se indique lo contrario.  

Precio recomendado de venta
Número de artículo: SRCD400018
Clave del producto: {{item.ItemClassification.Classification_01}}
Stock: {{item.ItemStock.Stock ? item.ItemStock.Stock : '0'}}
{{item.ItemVariations[0].TitleX.length > 0 ? item.ItemVariations[0].TitleX : ItemVariationX}}:
{{item.ItemVariations[0].TitleX.length > 0 ? item.ItemVariations[0].TitleX : ItemVariationX}}:
{{variation.DescriptionX}} {{variation.DescriptionX}} {{variation.DescriptionX}} {{variation.ItemStock.Stock ? variation.ItemStock.Stock : ''}}
{{item.ItemVariations[0].TitleY.length > 0 ? item.ItemVariations[0].TitleY : ItemVariationY}}:
{{item.ItemVariations[0].TitleY.length > 0 ? item.ItemVariations[0].TitleY : ItemVariationY}}:
{{variation.DescriptionY}} {{variation.DescriptionY}} {{variation.DescriptionY}} {{variation.ItemStock.Stock ? variation.ItemStock.Stock : ''}}
[Vraag advies - ES]

Rellene el siguiente formulario y nos pondremos en contacto con usted lo antes posible.

Contacta con nosotros

Precios graduados

Cantidad
Precio por unidad
{{itemRebate.AmountStart}} - {{itemRebate.AmountEnd}}
{{itemRebate.AmountStart}}
{{itemRebate.AmountStart}} +

Descripción del producto

Este tipo de Cleanflow es totalmente a prueba de polvo. Para el filtrado magnético de pequeñas cantidades de contaminantes ferrosos de polvos secos de baja fluidez, como los polvos grasos, en tuberías de transporte de caída libre. La rotación de las barras magnéticas evita la formación de apelmazamientos y obstrucciones.

características

Número de artículo
{{item.ItemCode}}
Código EAN
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
Porcentaje de IVA
{{item.VATPercentage}}%
UNSPSC
{{item.UNSPSC}}
Marca
{{item.ItemBrandDescription}}
Código del correo del artículo
{{item.ItemSupplierCode}}
Tamaño del paquete
{{item.PackSize}}
Suitable for food production
No
Max. particle size
10 mm
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Automatic
Ferrous particles disposal via
Pneumatically actuated valve box underneath product channel
Build-in length
1275 mm
Inlet shape
Square
Outlet shape
Square
Product inlet size
#400 mm
Product outlet size
#400 mm
Interface connection type/size
Rectangular flanges with hole pattern acc. to drawing
Pneumatic connection
For 6 mm hose
Electrical connection
To control unit
Max. capacity
60 m³/h
Version housing
Welded
Materials in contact with product
AISI304 (SS 1.4301) / AISI316L (SS 1.4404)
Material seal ring rotor disc
NBR RST, 70° Shore A
Material seal ring rotor shaft
NBR RST, 70° Shore A
Material flange gasket magnet housing / valve box
Silicone VMQ, 60° Shore, EC1935/FDA, transparent
Surface finishing (interior/exterior)
S1: Grit blasted, Ra 3 µm
Extra wear-resistant coating
No
Welds inside the product channel
WH: Continuously welded
Welds outside the product channel
WH: Welded shut
Max. operating temperature
60 °C
Max. operating temperature in ATEX environment
40 °C
Min./max. ambient temperature
-5 to 40 °C
ATEX marking
Ex II 3D
Suited for use in ATEX zone
22
Magnetic system
Magnetic bar in tube
Magnet quality
Neodymium N-42
Magnetic bars position / behaviour during production
Rotating, magnetic bars placed in a rotor
Magnetic bar size
Ø34 mm
Number of magnetic bars
12
Flux density on magnet tube in contact with product (±10%)
9400 gauss
Control unit power supply
3x400 V AC + N + PE; 50 Hz
Pneumatic supply magnetic bars
4 - 6 bar
Motor drive
SEW electro motor with gear box
Motor power
0,37 kW
Motor current
1,82 (Δ) / 1,05 (Y) A
Motor frequency
50 Hz
Motor voltage
230 (Δ) / 400 (Y) V AC
Motor rotational speed (out)
6 rpm
Motor dust/water protection class
IP65
Control
PLC Siemens LOGO! logic Module (included)
Including integrated valve box for Fe-particles disposal
Yes
Incl. all bars magnet in/out sensoring
No
Length
1565 mm
Width
610 mm
Height
1275 mm

Selecciona una pestaña