Nº d'article
{{item.ItemCode}}
code EAN
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
Pourcentage de TVA
{{item.VATPercentage}}%
la marque
{{item.ItemBrandDescription}}
Numéro de fabricant
{{item.SupplierCode}}
Code fournisseur de l'article
{{item.ItemSupplierCode}}
Taille de l'emballage
{{item.PackSize}}
Suitable for food production
Yes
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Manual
Ferrous particles disposal via
Manually taking out magnets + pulling them out of extractor
Interface connection type/size
Tube DN50 (Ø53x1,5 mm - acc. DIN 11850 R2/DIN 11866 A)
Connection for warm water
G ½'' BSP socket
Pressure drop (for water, at 1m/s)
5 - 40 mbar
Materials in contact with product
AISI316L (SS 1.4404)
Material seal between housing and door/magnet unit
Silicone VMQ, 70° Shore, EC1935/FDA, red
Surface finishing (interior/exterior)
S5: Vibratory polished, Ra 0,4 µm, ex. welds and end faces
Welds inside the product channel
WM: Continuously welded
Welds outside the product channel
WM: Continuously welded
Max. operating temperature
140 °C
Min./max. ambient temperature
-20 to 60 °C
Max. operating pressure (pipeline pressure)
10 bar
Magnetic system
Magnetic bar in extractor tube
Magnet quality
Neodymium N-42SH
Magnetic bars position / behaviour during production
Static, fixed position
Magnetic bar size
Extractor tube Ø25 mm; magnetic bar Ø23 mm
Number of magnetic bars
5
Flux density on (internal) magnetic bar (±10%)
10100 gauss
Flux density on magnet tube in contact with product (±10%)
7600 gauss