Número de artículo
{{item.ItemCode}}
Código EAN
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
Porcentaje de IVA
{{item.VATPercentage}}%
Marca
{{item.ItemBrandDescription}}
Código del correo del artículo
{{item.ItemSupplierCode}}
Tamaño del paquete
{{item.PackSize}}
Suitable for food production
For non-perishable foods only
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Manual
Ferrous particles disposal via
Manually taking out magnets + pulling them out of extractor
Product inlet size
Ø100 mm
Product outlet size
Ø100 mm
Interface connection type/size
Jacob connection DN100
Materials in contact with product
AISI316 (SS 1.4401) / AISI316L (SS 1.4404)
Material seal between housing and door/magnet unit
Silicone VMQ, 40° Shore, EC1935/FDA, red
Surface finishing (interior/exterior)
S1: Grit blasted, Ra 3 µm
Extra wear-resistant coating
No
Welds inside the product channel
Wm: Continuously welded
Welds outside the product channel
Wm: Continuously welded where possible
Max. operating temperature
60 °C
Min./max. ambient temperature
-20 to 60 °C
Max. operating pressure (pipeline pressure)
1,5 bar
ATEX marking
Free of own ignition sources
Suited for use in ATEX zone
20, 21 and 22
Magnetic system
Magnetic bar in extractor tube
Magnet quality
Neodymium N-42
Magnetic bars position / behaviour during production
Static, fixed positon in 2 rows, placed in cascade
Magnetic bar size
Extractor tube Ø25 mm; magnetic bar Ø23 mm
Number of magnetic bars
5 (2+3)
Flux density on (internal) magnetic bar (±10%)
10700 gauss
Flux density on magnet tube in contact with product (±10%)
8000 gauss
Safety device between housing and door/magnet unit
No