Número de artículo
{{item.ItemCode}}
Código EAN
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
Porcentaje de IVA
{{item.VATPercentage}}%
Marca
{{item.ItemBrandDescription}}
Código del correo del artículo
{{item.ItemSupplierCode}}
Tamaño del paquete
{{item.PackSize}}
Suitable for food production
Yes
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Manual
Ferrous particles disposal via
Manually taking out magnets + pulling them out of extractor
Product inlet size
#200 mm
Product outlet size
#200 mm
Interface connection type/size
Square flange - 12xM8
Materials in contact with product
AISI316 (SS 1.4401) / AISI316L (SS 1.4404)
Material seal between housing and door/magnet unit
Silicone VMQ, 40° Shore, EC1935/FDA, red
Surface finishing (interior/exterior)
S5: Vibratory polished, Ra 0,4 µm, ex. welds and end faces
Extra wear-resistant coating
No
Welds inside the product channel
Wm: Continuously welded
Welds outside the product channel
Wm: Continuously welded where possible
Max. operating temperature
60 °C
Min./max. ambient temperature
-20 to 60 °C
ATEX marking
Free of own ignition sources
Suited for use in ATEX zone
20, 21 and 22
Magnetic system
Magnetic bar in extractor tube
Magnet quality
Neodymium N-42
Magnetic bars position / behaviour during production
Static, fixed positon in 2 rows, placed in cascade
Magnetic bar size
Extractor tube Ø25 mm; magnetic bar Ø23 mm
Number of magnetic bars
7 (3+4)
Flux density on (internal) magnetic bar (±10%)
10700 gauss
Flux density on magnet tube in contact with product (±10%)
8000 gauss
Safety device between housing and door/magnet unit
No