Używamy plików cookies!
Nasza strona używa plików cookie. Używamy plików cookie, aby zapewnić lepsze wrażenia z przeglądania, analizować ruch w witrynie, personalizować treści i wyświetlać ukierunkowane reklamy.
Dowiedz się więcej o tym, jak używamy plików cookie i jak nimi zarządzać, klikając „Ustawienia plików cookie”.
Nowy
Sale
Właściwości
Numer artykułu
{{item.ItemCode}}
Kod EAN
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
Procent podatku VAT
{{item.VATPercentage}}%
UNSPSC
{{item.UNSPSC}}
Marka
{{item.ItemBrandDescription}}
Kod kuriera artykulu
{{item.ItemSupplierCode}}
Wielkosc opakowania
{{item.PackSize}}
Suitable for food production
For non-perishable foods only
Max. particle size
10 mm
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Manual
Ferrous particles disposal via
Manually taking out magnets + pulling them out of extractor
Build-in length
300 mm
Inlet shape
Rectangular
Outlet shape
Rectangular
Product inlet size
520x300 mm
Product outlet size
520x300 mm
Interface connection type/size
Rectangular flanges with hole pattern acc. to drawing
Electrical connection
To connection box
Max. capacity
45 m³/h
Version housing
Welded
Number of magnetic rotors
2
Materials in contact with product
AISI316 (SS 1.4401) / AISI316L (SS 1.4404)
Material seal between housing and door/magnet unit
Silicone VMQ, 40° Shore, EC1935/FDA, red
Motor oil: food grade
Yes
Surface finishing (interior/exterior)
S1: Grit blasted, Ra 3 µm
Extra wear-resistant coating
No
Welds inside the product channel
Wm: Continuously welded
Welds outside the product channel
Wm: Continuously welded where possible
Max. operating temperature
100 °C
Max. operating temperature in ATEX environment
40 °C
Min./max. ambient temperature
-20 to 40 °C
ATEX marking
Ex II 1/2 D T140 °C
Suited for use in ATEX zone
20, 21 and 22 inside, 21 and 22 outside
Magnetic system
Magnetic bar in extractor tube
Magnet quality
Neodymium N-45SH
Magnetic bars position / behaviour during production
Rotating, magnetic bars placed in 2 rotors
Magnetic bar size
Extractor tube Ø32 mm; magnetic bar Ø30 mm
Number of magnetic bars
2x7
Flux density on (internal) magnetic bar (±10%)
13000 gauss
Flux density on magnet tube in contact with product (±10%)
10500 gauss
Motor drive
SEW electro motor with gear box
Motor power
0,37 kW
Motor current
1,98 (Δ) / 1,14 (Y) A
Motor frequency
50 Hz
Motor voltage
230 (Δ) / 400 (Y) V AC
Motor rotational speed (out)
43 rpm
Motor dust/water protection class
IP65
Incl. double seal with air purging on shaft (max. 0.1 bar)
Yes
Incl. all bars magnet in/out sensoring
No
Safety device between housing and door/magnet unit
Switch (key type, Steute AZ16-zvk, Ex II 2GD)
Potential-free contact for ‘door closed’ signal
250 V AC max., 230 V DC max.
Potential-free contact for ‘motor on’ signal
600 V AC max., 250 V DC max.
Length
636 mm
Width
813 mm
Height
300 mm
Weight
84 kg
Cena
[BTW text]
Wszystkie ceny nie zawierają podatku VAT, chyba że określono inaczej.
Rekomendowana cena detaliczna
Numer artykułu:
E0159986
Klucz produktu:
{{item.ItemClassification.Classification_01}}
Zapasy:
{{item.ItemStock.Stock ? item.ItemStock.Stock : '0'}}
{{item.ItemVariations[0].TitleX.length > 0 ? item.ItemVariations[0].TitleX : ItemVariationX}}:
{{item.ItemVariations[0].TitleX.length > 0 ? item.ItemVariations[0].TitleX : ItemVariationX}}:
{{variation.DescriptionX}}
{{variation.DescriptionX}}
{{variation.DescriptionX}}
{{variation.ItemStock.Stock ? variation.ItemStock.Stock : ''}}
{{item.ItemVariations[0].TitleY.length > 0 ? item.ItemVariations[0].TitleY : ItemVariationY}}:
{{item.ItemVariations[0].TitleY.length > 0 ? item.ItemVariations[0].TitleY : ItemVariationY}}:
{{variation.DescriptionY}}
{{variation.DescriptionY}}
{{variation.DescriptionY}}
{{variation.ItemStock.Stock ? variation.ItemStock.Stock : ''}}
[Vraag advies - PL]
Wypełnij poniższy formularz, a my skontaktujemy się z Tobą tak szybko, jak to możliwe.
Ceny stopniowe
Ilość
Cena jednostkowa
{{itemRebate.AmountStart}} - {{itemRebate.AmountEnd}}
{{itemRebate.AmountStart}}
{{itemRebate.AmountStart}} +
Opis produktu
Nadają się szczególnie do filtracji magnetycznej małych ilości zanieczyszczeń żelaznych ze słabo płynących – np. tłustych – proszków w rurociągach transportowych ze swobodnym spadkiem. Obracanie prętów magnetycznych zapobiega zawieszaniu i zablokowaniu.Downloads (Pdf)
Downloads (STP)
Downloads (Pdf)
Downloads (STP)
Właściwości
Numer artykułu
{{item.ItemCode}}
Kod EAN
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
Procent podatku VAT
{{item.VATPercentage}}%
UNSPSC
{{item.UNSPSC}}
Marka
{{item.ItemBrandDescription}}
Kod kuriera artykulu
{{item.ItemSupplierCode}}
Wielkosc opakowania
{{item.PackSize}}
Suitable for food production
For non-perishable foods only
Max. particle size
10 mm
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Manual
Ferrous particles disposal via
Manually taking out magnets + pulling them out of extractor
Build-in length
300 mm
Inlet shape
Rectangular
Outlet shape
Rectangular
Product inlet size
520x300 mm
Product outlet size
520x300 mm
Interface connection type/size
Rectangular flanges with hole pattern acc. to drawing
Electrical connection
To connection box
Max. capacity
45 m³/h
Version housing
Welded
Number of magnetic rotors
2
Materials in contact with product
AISI316 (SS 1.4401) / AISI316L (SS 1.4404)
Material seal between housing and door/magnet unit
Silicone VMQ, 40° Shore, EC1935/FDA, red
Motor oil: food grade
Yes
Surface finishing (interior/exterior)
S1: Grit blasted, Ra 3 µm
Extra wear-resistant coating
No
Welds inside the product channel
Wm: Continuously welded
Welds outside the product channel
Wm: Continuously welded where possible
Max. operating temperature
100 °C
Max. operating temperature in ATEX environment
40 °C
Min./max. ambient temperature
-20 to 40 °C
ATEX marking
Ex II 1/2 D T140 °C
Suited for use in ATEX zone
20, 21 and 22 inside, 21 and 22 outside
Magnetic system
Magnetic bar in extractor tube
Magnet quality
Neodymium N-45SH
Magnetic bars position / behaviour during production
Rotating, magnetic bars placed in 2 rotors
Magnetic bar size
Extractor tube Ø32 mm; magnetic bar Ø30 mm
Number of magnetic bars
2x7
Flux density on (internal) magnetic bar (±10%)
13000 gauss
Flux density on magnet tube in contact with product (±10%)
10500 gauss
Motor drive
SEW electro motor with gear box
Motor power
0,37 kW
Motor current
1,98 (Δ) / 1,14 (Y) A
Motor frequency
50 Hz
Motor voltage
230 (Δ) / 400 (Y) V AC
Motor rotational speed (out)
43 rpm
Motor dust/water protection class
IP65
Incl. double seal with air purging on shaft (max. 0.1 bar)
Yes
Incl. all bars magnet in/out sensoring
No
Safety device between housing and door/magnet unit
Switch (key type, Steute AZ16-zvk, Ex II 2GD)
Potential-free contact for ‘door closed’ signal
250 V AC max., 230 V DC max.
Potential-free contact for ‘motor on’ signal
600 V AC max., 250 V DC max.
Length
636 mm
Width
813 mm
Height
300 mm
Weight
84 kg
Wybierz zakladke
Akcesoria
|
|
|
{{item.Description | maxLength: 50}}
Numer artykułu:
|
Zalecane artykuly
|
|
|
{{item.Description | maxLength: 50}}
Numer artykułu:
Zapasy:
Zapasy:
{{item.ItemStock.Stock ? item.ItemStock.Stock : '0'}}
|
Alternatywy
|
|
|
{{item.Description | maxLength: 50}}
Numer artykułu:
Zapasy:
Zapasy:
{{item.ItemStock.Stock ? item.ItemStock.Stock : '0'}}
|
Produkty zamienne
|
|
|
{{item.Description | maxLength: 50}}
Numer artykułu:
{{item.ItemCode}}
Zapasy:
Zapasy:
{{item.ItemStock.Stock ? item.ItemStock.Stock : '0'}}
|
Części zamienne
|
|
|
{{item.Description | maxLength: 50}}
Numer artykułu:
{{item.ItemCode}}
Zapasy:
Zapasy:
{{item.ItemStock.Stock ? item.ItemStock.Stock : '0'}}
|
Ostatnio ogladane
|
Sale
Nowy
|
|
{{item.Description | maxLength: 50}}
Numer artykułu:
|