{{item.Description}}

Nový
Prodej
Prodej
{{item.Description}}
{{item.Description}}

Vlastnosti

Číslo výrobku
{{item.ItemCode}}
Upravit adresu
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
procento DPH
{{item.VATPercentage}}%
UNSPSC
{{item.UNSPSC}}
Značka
{{item.ItemBrandDescription}}
Kód dodavatele
{{item.SupplierCode}}
Kód kurýra položky
{{item.ItemSupplierCode}}
Velikost balení
{{item.PackSize}}
Suitable for food production
For non-perishable foods only
Max. particle size
10 mm
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Manual
Ferrous particles disposal via
Manually taking out magnets + pulling them out of extractor
Build-in length
300 mm
Inlet shape
Rectangular
Outlet shape
Rectangular
Product inlet size
520x300 mm
Product outlet size
520x300 mm
Interface connection type/size
Rectangular flanges with hole pattern acc. to drawing
Electrical connection
To connection box
Max. capacity
36 m³/h
Version housing
Welded
Number of magnetic rotors
2
Materials in contact with product
AISI316 (SS 1.4401) / AISI316L (SS 1.4404)
Material seal between housing and door/magnet unit
Silicone VMQ, 40° Shore, EC1935/FDA, red
Motor oil: food grade
Yes
Surface finishing (interior/exterior)
S1: Grit blasted, Ra 3 µm
Extra wear-resistant coating
No
Welds inside the product channel
Wm: Continuously welded
Welds outside the product channel
Wm: Continuously welded where possible
Max. operating temperature
60 °C
Max. operating temperature in ATEX environment
40 °C
Min./max. ambient temperature
-20 to 40 °C
ATEX marking
Ex II 1/2 D T140 °C
Suited for use in ATEX zone
20, 21 and 22 inside, 21 and 22 outside
Magnetic system
Magnetic bar in extractor tube
Magnet quality
Neodymium N-42
Magnetic bars position / behaviour during production
Rotating, magnetic bars placed in 2 rotors
Magnetic bar size
Extractor tube Ø25 mm; magnetic bar Ø23 mm
Number of magnetic bars
2x12
Flux density on (internal) magnetic bar (±10%)
10700 gauss
Flux density on magnet tube in contact with product (±10%)
8000 gauss
Motor drive
SEW electro motor with gear box
Motor power
0,37 kW
Motor current
1,98 (Δ) / 1,14 (Y) A
Motor frequency
50 Hz
Motor voltage
230 (Δ) / 400 (Y) V AC
Motor rotational speed (out)
43 rpm
Motor dust/water protection class
IP65
Incl. double seal with air purging on shaft (max. 0.1 bar)
Yes
Incl. all bars magnet in/out sensoring
No
Safety device between housing and door/magnet unit
Switch (key type, Steute AZ16-zvk, Ex II 2GD)
Potential-free contact for ‘door closed’ signal
250 V AC max., 230 V DC max.
Potential-free contact for ‘motor on’ signal
600 V AC max., 250 V DC max.
Length
636 mm
Width
813 mm
Height
300 mm
Weight
93 kg
Krok {{$index + 1}}: {{itemAttribute.Description}} ({{vm.selectedItemOptions[itemAttribute.AttributeID].AttributeValue.Description}})

{{itemAttribute.Description}}

{{ '{0} by mělo mít alespoň {1} znaků'.replace('{0}', itemAttribute.Description).replace('{1}', itemAttribute.MinLength) }} {{ '{0} může mít maximálně {1} znaků'.replace('{0}', itemAttribute.Description).replace('{1}', itemAttribute.MaxLength) }} {{ '{0} musí být mezi {1} a {2}'.replace('{0}', itemAttribute.Description).replace('{1}', itemAttribute.MinLength ? itemAttribute.MinLength : 0).replace('{2}', itemAttribute.MaxLength) }} {{ '{0} obsahuje příliš mnoho desetinných míst'.replace('{0}', itemAttribute.Description) }} Volba je vyžadována
Je povinné provést volbu
Volba je vyžadována

Cena
[BTW text]

Pokud není uvedeno jinak, jsou všechny ceny uvedeny bez DPH.  

Maloobchodní cena
Číslo výrobku: SCRA5230022
Produktový klíč: {{item.ItemClassification.Classification_01}}
Skladem: {{item.ItemStock.Stock ? item.ItemStock.Stock : '0'}}
{{item.ItemVariations[0].TitleX.length > 0 ? item.ItemVariations[0].TitleX : ItemVariationX}}:
{{item.ItemVariations[0].TitleX.length > 0 ? item.ItemVariations[0].TitleX : ItemVariationX}}:
{{variation.DescriptionX}} {{variation.DescriptionX}} {{variation.DescriptionX}} {{variation.ItemStock.Stock ? variation.ItemStock.Stock : ''}}
{{item.ItemVariations[0].TitleY.length > 0 ? item.ItemVariations[0].TitleY : ItemVariationY}}:
{{item.ItemVariations[0].TitleY.length > 0 ? item.ItemVariations[0].TitleY : ItemVariationY}}:
{{variation.DescriptionY}} {{variation.DescriptionY}} {{variation.DescriptionY}} {{variation.ItemStock.Stock ? variation.ItemStock.Stock : ''}}
[Vraag advies - CZ]

Vyplňte níže uvedený formulář a my vás budeme co nejdříve kontaktovat.

Kontaktujte nás

Odstupňované ceny

Množství
Cena za jednotku
{{itemRebate.AmountStart}} - {{itemRebate.AmountEnd}}
{{itemRebate.AmountStart}}
{{itemRebate.AmountStart}} +

Popis výrobku

Vhodné zejména pro magnetickou filtraci malých množství železných nečistot ze špatně proudících prášků, např. mastných, v přepravních potrubích s volně se sypajícím materiálem. Otáčení magnetických tyčí brání uvíznutí a ucpání.

Vlastnosti

Číslo výrobku
{{item.ItemCode}}
Upravit adresu
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
procento DPH
{{item.VATPercentage}}%
UNSPSC
{{item.UNSPSC}}
Značka
{{item.ItemBrandDescription}}
Kód dodavatele
{{item.SupplierCode}}
Kód kurýra položky
{{item.ItemSupplierCode}}
Velikost balení
{{item.PackSize}}
Suitable for food production
For non-perishable foods only
Max. particle size
10 mm
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Manual
Ferrous particles disposal via
Manually taking out magnets + pulling them out of extractor
Build-in length
300 mm
Inlet shape
Rectangular
Outlet shape
Rectangular
Product inlet size
520x300 mm
Product outlet size
520x300 mm
Interface connection type/size
Rectangular flanges with hole pattern acc. to drawing
Electrical connection
To connection box
Max. capacity
36 m³/h
Version housing
Welded
Number of magnetic rotors
2
Materials in contact with product
AISI316 (SS 1.4401) / AISI316L (SS 1.4404)
Material seal between housing and door/magnet unit
Silicone VMQ, 40° Shore, EC1935/FDA, red
Motor oil: food grade
Yes
Surface finishing (interior/exterior)
S1: Grit blasted, Ra 3 µm
Extra wear-resistant coating
No
Welds inside the product channel
Wm: Continuously welded
Welds outside the product channel
Wm: Continuously welded where possible
Max. operating temperature
60 °C
Max. operating temperature in ATEX environment
40 °C
Min./max. ambient temperature
-20 to 40 °C
ATEX marking
Ex II 1/2 D T140 °C
Suited for use in ATEX zone
20, 21 and 22 inside, 21 and 22 outside
Magnetic system
Magnetic bar in extractor tube
Magnet quality
Neodymium N-42
Magnetic bars position / behaviour during production
Rotating, magnetic bars placed in 2 rotors
Magnetic bar size
Extractor tube Ø25 mm; magnetic bar Ø23 mm
Number of magnetic bars
2x12
Flux density on (internal) magnetic bar (±10%)
10700 gauss
Flux density on magnet tube in contact with product (±10%)
8000 gauss
Motor drive
SEW electro motor with gear box
Motor power
0,37 kW
Motor current
1,98 (Δ) / 1,14 (Y) A
Motor frequency
50 Hz
Motor voltage
230 (Δ) / 400 (Y) V AC
Motor rotational speed (out)
43 rpm
Motor dust/water protection class
IP65
Incl. double seal with air purging on shaft (max. 0.1 bar)
Yes
Incl. all bars magnet in/out sensoring
No
Safety device between housing and door/magnet unit
Switch (key type, Steute AZ16-zvk, Ex II 2GD)
Potential-free contact for ‘door closed’ signal
250 V AC max., 230 V DC max.
Potential-free contact for ‘motor on’ signal
600 V AC max., 250 V DC max.
Length
636 mm
Width
813 mm
Height
300 mm
Weight
93 kg