{{item.Description}}

Nuevo
Sale
Sale
{{item.Description}}
{{item.Description}}

características

Número de artículo
{{item.ItemCode}}
Código EAN
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
Porcentaje de IVA
{{item.VATPercentage}}%
UNSPSC
{{item.UNSPSC}}
Marca
{{item.ItemBrandDescription}}
Código del correo del artículo
{{item.ItemSupplierCode}}
Tamaño del paquete
{{item.PackSize}}
Max. particle size
16 mm
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Manual
Ferrous particles disposal via
Manually taking out magnets + pulling them out of extractor
Build-in length
300 mm
In-/outlet shape
Round
Interface connection type/size
DN100 acc. EN 1092-1 PN16
Pressure drop (for water, at 1m/s)
5 - 40 mbar
Magnet unit guidance for easy cleaning
No
Materials in contact with product
AISI316L (SS 1.4404)
Material seal between housing and door/magnet unit
Silicone VMQ, 70° Shore, EC1935/FDA, red
Surface finishing (interior/exterior)
S1: Grit blasted, Ra 3 µm
Welds inside the product channel
Wm: Continuously welded
Welds outside the product channel
Wm: Continuously welded where possible
Max. operating temperature
140 °C
Min./max. ambient temperature
-10 to 60 °C
Max. operating pressure (pipeline pressure)
10 bar
Test pressure
15 bar
Magnetic system
Magnetic bar in extractor tube
Magnet quality
Neodymium N-42SH
Magnetic bars position / behaviour during production
Static, fixed position
Magnetic bar size
Extractor tube Ø25 mm; magnetic bar Ø23 mm
Number of magnetic bars
7
Flux density on (internal) magnetic bar (±10%)
10700 gauss
Flux density on magnet tube in contact with product (±10%)
8000 gauss
Sieve
No
Safety device between housing and door/magnet unit
No
Length
300 mm
Width
260 mm
Height
262 mm
Weight
26 kg
Paso {{$index + 1}}: {{itemAttribute.Description}} ({{vm.selectedItemOptions[itemAttribute.AttributeID].AttributeValue.Description}})

{{itemAttribute.Description}}

{{ '{0} debe tener al menos {1} caracteres'.replace('{0}', itemAttribute.Description).replace('{1}', itemAttribute.MinLength) }} {{ '{0} puede tener como máximo {1} caracteres'.replace('{0}', itemAttribute.Description).replace('{1}', itemAttribute.MaxLength) }} {{ '{0} debe estar entre {1} y {2}'.replace('{0}', itemAttribute.Description).replace('{1}', itemAttribute.MinLength ? itemAttribute.MinLength : 0).replace('{2}', itemAttribute.MaxLength) }} {{ '{0} contiene demasiados decimales'.replace('{0}', itemAttribute.Description) }} Se requiere la opción
Es obligatorio hacer una elección
Se requiere la opción

Precio
[BTW text]

Todos los precios son sin IVA, salvo que se indique lo contrario.  

Precio recomendado de venta
Número de artículo: SSFI010038
Clave del producto: {{item.ItemClassification.Classification_01}}
Stock: {{item.ItemStock.Stock ? item.ItemStock.Stock : '0'}}
{{item.ItemVariations[0].TitleX.length > 0 ? item.ItemVariations[0].TitleX : ItemVariationX}}:
{{item.ItemVariations[0].TitleX.length > 0 ? item.ItemVariations[0].TitleX : ItemVariationX}}:
{{variation.DescriptionX}} {{variation.DescriptionX}} {{variation.DescriptionX}} {{variation.ItemStock.Stock ? variation.ItemStock.Stock : ''}}
{{item.ItemVariations[0].TitleY.length > 0 ? item.ItemVariations[0].TitleY : ItemVariationY}}:
{{item.ItemVariations[0].TitleY.length > 0 ? item.ItemVariations[0].TitleY : ItemVariationY}}:
{{variation.DescriptionY}} {{variation.DescriptionY}} {{variation.DescriptionY}} {{variation.ItemStock.Stock ? variation.ItemStock.Stock : ''}}
[Vraag advies - ES]

Rellene el siguiente formulario y nos pondremos en contacto con usted lo antes posible.

Contacta con nosotros

Precios graduados

Cantidad
Precio por unidad
{{itemRebate.AmountStart}} - {{itemRebate.AmountEnd}}
{{itemRebate.AmountStart}}
{{itemRebate.AmountStart}} +

Descripción del producto

Filtro robusto para aplicaciones industriales en general. Para el filtrado magnético de contaminantes ferrosos finos, como partículas de desgaste de acero inoxidable, de sus flujos de líquido y polvo en tuberías de presión de hasta 10 bares. Limpieza rápida manual. Las versiones más grandes están equipadas además con una guía de extracción para que la unidad de imán no tenga que levantarse, sino que pueda extenderse.

características

Número de artículo
{{item.ItemCode}}
Código EAN
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
Porcentaje de IVA
{{item.VATPercentage}}%
UNSPSC
{{item.UNSPSC}}
Marca
{{item.ItemBrandDescription}}
Código del correo del artículo
{{item.ItemSupplierCode}}
Tamaño del paquete
{{item.PackSize}}
Max. particle size
16 mm
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Manual
Ferrous particles disposal via
Manually taking out magnets + pulling them out of extractor
Build-in length
300 mm
In-/outlet shape
Round
Interface connection type/size
DN100 acc. EN 1092-1 PN16
Pressure drop (for water, at 1m/s)
5 - 40 mbar
Magnet unit guidance for easy cleaning
No
Materials in contact with product
AISI316L (SS 1.4404)
Material seal between housing and door/magnet unit
Silicone VMQ, 70° Shore, EC1935/FDA, red
Surface finishing (interior/exterior)
S1: Grit blasted, Ra 3 µm
Welds inside the product channel
Wm: Continuously welded
Welds outside the product channel
Wm: Continuously welded where possible
Max. operating temperature
140 °C
Min./max. ambient temperature
-10 to 60 °C
Max. operating pressure (pipeline pressure)
10 bar
Test pressure
15 bar
Magnetic system
Magnetic bar in extractor tube
Magnet quality
Neodymium N-42SH
Magnetic bars position / behaviour during production
Static, fixed position
Magnetic bar size
Extractor tube Ø25 mm; magnetic bar Ø23 mm
Number of magnetic bars
7
Flux density on (internal) magnetic bar (±10%)
10700 gauss
Flux density on magnet tube in contact with product (±10%)
8000 gauss
Sieve
No
Safety device between housing and door/magnet unit
No
Length
300 mm
Width
260 mm
Height
262 mm
Weight
26 kg

Selecciona una pestaña