New
Sale
  1. {{item.Description}}
Sale
{{item.Description}}
{{item.Description}}
{{item.Description}}

Attributes

Article number
{{item.ItemCode}}
EAN code
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
VAT percentage
{{item.VATPercentage}}%
UNSPSC
{{item.UNSPSC}}
Brand
{{item.ItemBrandDescription}}
Item courier code
{{item.ItemSupplierCode}}
Pack size
{{item.PackSize}}
Suitable for food production
For non-perishable foods only
Max. particle size
10 mm
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Automatic
Ferrous particles disposal via
Pneumatically moving to and cleaning magnets in side channel
Ferrous particles disposal collection unit
No
Build-in length
145 mm
Inlet shape
Square
Outlet shape
Square
Product inlet size
#300 mm
Product outlet size
#300 mm
Ferrous particles outlet size
#120 mm
Interface connection type/size
Square flanges with hole pattern acc. to drawing
Pneumatic connection
For 6 mm hose
Electrical connection
To solenoid valve
Electrical connection 2
To proximity sensors for magnet (bar) detection (3x24 V)
Max. capacity
65 m³/h
Deflector grid
No
Materials in contact with product
AISI304 (SS 1.4301) / AISI316L (SS 1.4404)
Material gasket inspection hatch(es)
Silicone VMQ, 60° Shore, EC1935/FDA, transparent
Material gasket top plate
Silicone VMQ, 60° Shore, EC1935/FDA, transparent
Material seal rings between housing and magnetic bars
Silicone 714177 coated, 70° Shore, EC1935/FDA, red
Top inspection hatch
Bolted cover plate AISI316L (SS 1.4404)
Side inspection hatch
Bolted cover plate PETG Griphen (transparent)
Surface finishing (interior/exterior)
S1: Grit blasted, Ra 3 µm
Extra wear-resistant coating
No
Welds inside the product channel
WM: Continuously welded
Welds outside the product channel
Wm: Continuously welded where possible
Max. operating temperature
60 °C
Max. operating temperature in ATEX environment
40 °C
Min./max. ambient temperature
-5 to 40 °C
Max. operating pressure (pipeline pressure)
0,5 bar
ATEX marking
Ex II 1/2 D T130 °C
Suited for use in ATEX zone
20, 21 and 22 inside, 21 and 22 outside
Magnetic system
Magnetic bar in tube
Magnet quality
Neodymium N-52
Magnetic bars position / behaviour during production
Static, fixed position 1 row
Magnetic bar size
Ø52,4 mm (wall thickness 1,2 mm)
Number of magnetic bars
3
Flux density on magnet tube in contact with product (±10%)
12000 gauss
Solenoid valve electric supply
2x24 V DC
Pneumatic supply magnetic bars
4 - 6 bar
Control
Electrical/pneumatic
Incl. Sigmatek PLC control
No
Incl. single bar in/out sensoring
Yes
Incl. all bars magnet in/out sensoring
No
Length
1330 mm
Width
711 mm
Height
598 mm
Weight
100 kg
Read more Read less
Step {{$index + 1}}: {{itemAttribute.Description}} ({{vm.selectedItemOptions[itemAttribute.AttributeID].AttributeValue.Description}})

{{itemAttribute.Description}}

{{ '{0} should be at least {1} characters'.replace('{0}', itemAttribute.Description).replace('{1}', itemAttribute.MinLength) }} {{ '{0} can be at most {1} characters'.replace('{0}', itemAttribute.Description).replace('{1}', itemAttribute.MaxLength) }} {{ '{0} must be between {1} and {2}'.replace('{0}', itemAttribute.Description).replace('{1}', itemAttribute.MinLength ? itemAttribute.MinLength : 0).replace('{2}', itemAttribute.MaxLength) }} {{ '{0} contains too many decimals'.replace('{0}', itemAttribute.Description) }} Option is required
{{attributeValue.Description}} {{attributeValue.Description}}
It is mandatory to make a choice
Option is required
Add to Cart Request quote
Price
[BTW text ]
All prices quoted are exclusive of VAT unless stated otherwise.
Retail price
Article number: E0164673
Product key: {{item.ItemClassification.Classification_01}}
Stock: {{item.ItemStock.Stock ? item.ItemStock.Stock : '0'}}
{{item.ItemVariations[0].TitleX.length > 0 ? item.ItemVariations[0].TitleX : ItemVariationX}}:
{{item.ItemVariations[0].TitleX.length > 0 ? item.ItemVariations[0].TitleX : ItemVariationX}}:
{{variation.DescriptionX}} {{variation.DescriptionX}} {{variation.DescriptionX}} {{variation.ItemStock.Stock ? variation.ItemStock.Stock : ''}}
{{item.ItemVariations[0].TitleY.length > 0 ? item.ItemVariations[0].TitleY : ItemVariationY}}:
{{item.ItemVariations[0].TitleY.length > 0 ? item.ItemVariations[0].TitleY : ItemVariationY}}:
{{variation.DescriptionY}} {{variation.DescriptionY}} {{variation.DescriptionY}} {{variation.ItemStock.Stock ? variation.ItemStock.Stock : ''}}
[Vraag advies - EN]

Fill in the form below and we will contact you as soon as possible.

Contact us
Add to Cart
Ask a question

Graduated prices

Quantity
Price per unit
{{itemRebate.AmountStart}} - {{itemRebate.AmountEnd}}
{{itemRebate.AmountStart}}
{{itemRebate.AmountStart}} +

Product description

These new 'EasyClean' type Cleanflows are equipped with robust Ø50 mm magnetic bars, that measure no less than 12,000 gauss at the contact surface of the bars. Suitable for magnetic filtering of small amounts of ferrous and even weakly-magnetic contaminants from high-capacity granulate and powder flows in free-fall and low-pressure transport pipes up to 0.5 bar. The automatic cleaning makes this separator suitable for situations where the magnetic separator is hardly or not accessible for operation and cleaning.
Read more Read less

Downloads (Pdf)

2D Drawing (Pdf)
Pneumatic connections drawing [pdf] - EN (Pdf)
Connection box ExII2D - Electrical diagram [pdf] - EN (Pdf)
Product key [pdf] - EN (Pdf)
User manual - EN (Pdf)
Ex certificate IBExU - EN (Pdf)

Downloads (STP)

3D Step file (STP)

Downloads (Pdf)

2D Drawing (Pdf)
Pneumatic connections drawing [pdf] - EN (Pdf)
Connection box ExII2D - Electrical diagram [pdf] - EN (Pdf)
Product key [pdf] - EN (Pdf)
User manual - EN (Pdf)
Ex certificate IBExU - EN (Pdf)

Downloads (STP)

3D Step file (STP)

Attributes

Article number
{{item.ItemCode}}
EAN code
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
VAT percentage
{{item.VATPercentage}}%
UNSPSC
{{item.UNSPSC}}
Brand
{{item.ItemBrandDescription}}
Item courier code
{{item.ItemSupplierCode}}
Pack size
{{item.PackSize}}
Suitable for food production
For non-perishable foods only
Max. particle size
10 mm
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Automatic
Ferrous particles disposal via
Pneumatically moving to and cleaning magnets in side channel
Ferrous particles disposal collection unit
No
Build-in length
145 mm
Inlet shape
Square
Outlet shape
Square
Product inlet size
#300 mm
Product outlet size
#300 mm
Ferrous particles outlet size
#120 mm
Interface connection type/size
Square flanges with hole pattern acc. to drawing
Pneumatic connection
For 6 mm hose
Electrical connection
To solenoid valve
Electrical connection 2
To proximity sensors for magnet (bar) detection (3x24 V)
Max. capacity
65 m³/h
Deflector grid
No
Materials in contact with product
AISI304 (SS 1.4301) / AISI316L (SS 1.4404)
Material gasket inspection hatch(es)
Silicone VMQ, 60° Shore, EC1935/FDA, transparent
Material gasket top plate
Silicone VMQ, 60° Shore, EC1935/FDA, transparent
Material seal rings between housing and magnetic bars
Silicone 714177 coated, 70° Shore, EC1935/FDA, red
Top inspection hatch
Bolted cover plate AISI316L (SS 1.4404)
Side inspection hatch
Bolted cover plate PETG Griphen (transparent)
Surface finishing (interior/exterior)
S1: Grit blasted, Ra 3 µm
Extra wear-resistant coating
No
Welds inside the product channel
WM: Continuously welded
Welds outside the product channel
Wm: Continuously welded where possible
Max. operating temperature
60 °C
Max. operating temperature in ATEX environment
40 °C
Min./max. ambient temperature
-5 to 40 °C
Max. operating pressure (pipeline pressure)
0,5 bar
ATEX marking
Ex II 1/2 D T130 °C
Suited for use in ATEX zone
20, 21 and 22 inside, 21 and 22 outside
Magnetic system
Magnetic bar in tube
Magnet quality
Neodymium N-52
Magnetic bars position / behaviour during production
Static, fixed position 1 row
Magnetic bar size
Ø52,4 mm (wall thickness 1,2 mm)
Number of magnetic bars
3
Flux density on magnet tube in contact with product (±10%)
12000 gauss
Solenoid valve electric supply
2x24 V DC
Pneumatic supply magnetic bars
4 - 6 bar
Control
Electrical/pneumatic
Incl. Sigmatek PLC control
No
Incl. single bar in/out sensoring
Yes
Incl. all bars magnet in/out sensoring
No
Length
1330 mm
Width
711 mm
Height
598 mm
Weight
100 kg
Read more Read less

Select a tab

Accessories

New
Sale
{{item.Description}}
{{item.Description | maxLength: 50}}
Article number:

Recommended items

New
Sale
{{item.Description}}
{{item.Description | maxLength: 50}}
Article number:
Stock:
Stock: {{item.ItemStock.Stock ? item.ItemStock.Stock : '0'}}

alternatives

New
Sale
{{item.Description}}
{{item.Description | maxLength: 50}}
Article number:
Stock:
Stock: {{item.ItemStock.Stock ? item.ItemStock.Stock : '0'}}

Replacement Products

New
Sale
{{item.Description}}
{{item.Description | maxLength: 50}}
Article number:
{{item.ItemCode}}
Stock:
Stock: {{item.ItemStock.Stock ? item.ItemStock.Stock : '0'}}

Spare parts

New
Sale
{{item.Description}}
{{item.Description | maxLength: 50}}
Article number:
{{item.ItemCode}}
Stock:
Stock: {{item.ItemStock.Stock ? item.ItemStock.Stock : '0'}}

Recently viewed

Sale
New
{{item.Description}}
{{item.Description | maxLength: 50}}
Article number: